Nordic Semiconductor – Specialist in Low Power Wireless Technology

The nRF5340 DK is the development kit for the nRF5340 SoC, containing everything needed to get started with development, on a single board. The DK supports development with an extensive range of wireless protocols.

The nRF5340 Audio Development Kit (DK) is the recommended platform for Bluetooth “LE Audio” products and contains everything needed to start development. The kit is configurable and can function as a USB dongle to send or receive audio data from a PC. It can also function as a Business Headset a broadcast receiver or a True Wireless Stereo (TWS) Earbud. For most use-cases, we recommend using two or more DKs.

The Nordic Thingy:53 is the rapid prototyping platform, based on the nRF5340 System-on-Chip (SoC), Nordic´s current flagship dual-core wireless SoC. With integrated sensors for motion, sound, light and environmental factors, it is the perfect platform for building proof-of-concepts and developing new prototypes in a very short time.

The nRF52840 is an advanced, highly flexible single chip solution for today’s increasingly demanding ULP wireless applications for connected devices on our person, connected living environments and the IoT at large.

Key Features:

• 64 MHz Arm® Cortex-M4 with FPU ­
• 1 MB Flash + 256 kB RAM ­
• Bluetooth 5.3 multiprotocol radio
  • 2 Mbps y CSA #2
  • Advertising Extensions
  • Long Range
  • +8 dBm TX power
  • -95 dBm sensitivity
  • Integrated balun with 50 Ω single- ended output ­

• IEEE 802.15.4 radio support
  • Thread
  • Zigbee ­

• 1.7-5.5 V supply voltage range ­
• Full-speed 12 Mbps USB ­
• NFC-A tag ­
• Arm CryptoCell CC310 security subsystem ­
• QSPI/SPI/TWI/I²S/PDM/QDEC ­
• High speed 32 MHz SPI ­
• Quad SPI interface 32 MHz ­
• EasyDMA for all digital interfaces ­
• 12-bit 200 ksps ADC ­
• 128 bit AES/ECB/CCM/AAR co-processor ­
• On-chip DC-DC buck converter ­
• Regulated supply for external components up to 25 mA

Applications:

• IoT
  • Smart Home products
  • Matter connected home products
  • Industrial mesh networks
  • Smart city infrastructure

• Advanced wearables
  • Connected watches
  • Advanced personal fitness devices Wearables with wireless payment
  • Connected Health
  • Virtual/Augmented Reality applications

• Interactive entertainment devices
  • Advanced remote controls
  • Gaming controller

The nRF52833 is an ultra-low-power multiprotocol SoC qualified for operation at an extended temperature range of -40° C to 105° C. Its feature set fulfills the requirements of professional lighting, advanced wearables, and higher value IoT applications. It supports Bluetooth LE, Bluetooth mesh, 802.15.4, Thread, Zigbee, and proprietary 2.4 GHz protocols.

Key Features:

• Arm processor
  • 64 MHz Arm® Cortex-M4 with FPU
  • 512 kB Flash + 128 kB RAM
  • 8 kB Cache ­

• Bluetooth 5.3 Radio
  • Direction Finding
  • Long Range
  • Bluetooth mesh
  • +8 dBm TX power
  • -95 dBm sensitivity (1 Mbps) ­

• IEEE 802.15.4 radio support
  • Thread
  • Zigbee ­

• NFC ­
• Full range of digital interfaces with EasyDMA
  • Full-speed USB
  • 32 MHz high-speed SPI ­

• 128 bit AES/ECB/CCM/AAR accelerator ­
• 12-bit 200 ksps ADC ­
• 105 °C extended operating temperature ­
• 1.7-5.5 V supply voltage range

Applications:

• Professional lighting ­
• Industrial ­
• Advanced wearables ­
• Gaming ­
• Smart home ­
• Asset tracking and RTLS

The nRF52832 is a general-purpose multiprotocol SoC. It meets the challenges of a broad range of applications that need advanced Bluetooth® LE features, protocol concurrency and a rich and varied set of peripherals and features.

Key Features:

• Arm processor
  • 64 MHz Arm® Cortex-M4 with FPU
  • 512/256 kB Flash + 64/32 kB RAM
  • Cache ­

• Bluetooth 5.3 Radio
  • Long Range
  • Bluetooth mesh
  • +4 dBm TX power
  • -96 dBm sensitivity (1 Mbps)

• Programmable output power +4 dBm to -20 dBm ­
• Flexible and configurable 32 pin GPIO ­
• Automatic smart power management ­
• Full set of digital interfaces with DA:
  • SPI
  • TWI
  • I²S
  • UART
  • PDM
  • QDEC ­

• 128-bit AES/ECB/CCM/AAR accelerator
• 12-bit 200 ksps ADC
• 1.7-3.6 V supply voltage range

Applications:

• Smart Home ­
• Sensor Networks ­
• Building automation ­
• Medical ­
• Remote control ­
• Beacons ­
• PC peripherals ­
• Toys ­ Wearables

Key Features:

• Arm processor
  • 64 MHz Arm® Cortex-M4 with FPU
  • 256 kB Flash + 32 kB RAM

• Bluetooth 5.3 Radio
  • Direction Finding
  • Long Range
  • Bluetooth mesh
  • +8 dBm TX power
  • -95 dBm sensitivity (1 Mbps)

• IEEE 802.15.4 radio support
  • Thread
  • Zigbee ­

• Full range of digital interfaces with EasyDMA
  • Full-speed USB 2.0
  • 32 MHz high-speed SPI

• 128-bit AES/ECB/CCM/AAR accelerator
• 105 °C extended operating temperature
• ­ 1.7-3.6 V supply voltage range

Applications:

• Professional lighting ­
• Industrial ­
• Human Interface device ­
• Wearables ­
• Gaming ­
• Smart home ­
• Gateways ­
• Asset tracking and RTLS

Key Features:

• 64 MHz Arm® Cortex-M4 ­
• 192 kB Flash + 24 kB RAM ­
• Bluetooth 5.3 radio
  • Direction Finding
  • Long Range
  • +4 dBm TX power
  • -96 dBm sensitivity
  • 4.6 mA in TX (0 dBm)
  • 4.6 mA in RX
  • Integrated balun with 50 Ω single- ended output ­

• IEEE 802.15.4 radio support
  • Thread
  • Zigbee ­

• 1.7-3.6 V supply voltage range ­
• Integrated DC-DC regulator ­
• 0.3 μA in System OFF ­
• 1.1 uA in System ON with RTC and full RAM retention ­
• Full range of digital interfaces with EasyDMA ­
• 12-bit 200 ksps ADC
• Small size

Applications:

• Beacons ­
• Network processor ­
• Proximity solutions ­
• Real time locating systems ­
• Asset tracking ­
• Smart home

Key Features:

• 64 MHz ARM® Cortex-M4 ­
• 192 kB Flash + 24 kB RAM ­
• Bluetooth 5.3 2.4 GHz transceiver
  • 2 Mbps
  • CSA #2
  • Concurrent multiprotocol operation
  • +4 dBm TX Power
  • -96 dBm Sensitivity
  • 4.6 mA TX (0 dBm)
  • 4.6 mA RX (1 Mbps)
  • Integrated balun with 50 Ω single- ended output ­

• 1.7-3.6 V supply voltage range ­ Integrated DC-DC regulator ­
• 0.3 μA in System OFF ­
• 1.5 μA in System ON with RTC ­
• Full range of digital interfaces with EasyD-MA ­
• 12-bit 200 ksps ADC ­
• Small size

Applications:

• Beacons ­
• Network processor ­
• Disposable medical sensors ­
• PC peripherals ­
• Remote controls ­
• Fitness sensors ­
• Toys ­
• Logistics and tagging

Key Features:

• 64 MHz Arm Cortex-M4 ­
• 192 kB Flash + 24 kB RAM ­
• Bluetooth Low Energy
  • Bluetooth 5.3
  • High-throughput 2 Mbps
  • Channel selection algorithm #2 ­

• 2.4 GHz proprietary protocol support ­ Ultra-low-power 2.4 GHz multiprotocol radio
  • +4 dBm TX power
  • -97 dBm RX sensitivity
  • 7 mA in TX (4 dBm)
  • 4.6 mA in TX (0 dBm)
  • 4.6 mA in RX (1 Mbps)
  • Integrated balun with single-ended output ­

• SPI, TWI, UART, QDEC ­
• 2-channel 12-bit ADC ­
• Integrated DC/DC regulator ­
• 0.3 μA in System OFF ­
• 1.1 μA in System ON with 24 KB RAM retained and RTC running ­
• Optimized for small two-layer PCB designs
  • 2.48x2.46 mm WLCSP package
  • Significanly lower cost than four-layer PCB designs
  • Only 10 external passive components
  • 9.5x8.8 mm reference layout is available, giving access to all 10 GPIOs

Applications:

• IoT
  • Smart Home products
  • Matter connected home products
  • Industrial mesh networks
  • Smart city infrastructure

• Advanced wearables
  • Connected watches
  • Advanced personal fitness devices Wearables with wireless payment
  • Connected Health
  • Virtual/Augmented Reality applications

• Interactive entertainment devices
  • Advanced remote controls
  • Gaming controller

The nRF52 DK is a development kit that includes hardware, firmware source code, documentation, hardware schematics, and layout files. This kit can be used for developing for either the nRF52832 or nRF52810 SoCs. The content of the kit is the nRF52 DK, a CR2032 battery and a NFC antenna.

The nRF52833 DK is an affordable single-board development kit for Bluetooth® Low Energy (LE), Bluetooth® mesh, Thread, Zigbee, 802.15.4 and 2.4 GHz proprietary applications using the nRF52833 multi-protocol SoC. It also supports development for the nRF52820 SoC. The kit is hardware compatible with the Arduino Uno Rev3 standard, making it possible to use a wide range of 3rd-party shields that are compatible with this standard, including the Power Profiler Kit or Power Profiler Kit II from Nordic Semiconductor.

The nRF52840 DK is a development kit including hardware, firmware source code, documentation, hardware schematics, and layout files. This kit can be used for developing for either the nRF52840 or nRF52811 System on Chip (SoC)s.

The nRF52840 Dongle (PCA10059) is the preferred hardware to be used with the nRF Connect for Desktop software package to develop and test your nRF-based wireless solutions. The hardware supports all the short range wireless standards available on the nRF52 family of devices, and the built-in USB device controller provides a high data throughput communication interface.

The nRF21540 DB consists of the nRF21540 development kit (DK) and the nRF21540 evaluation kit (EK). The nRF21540 DK is the perfect tool to develop products that require the range extension capabilities or link budget improvements provided by the nRF21540 RF front-end module (FEM). The nRF21540 EK can connect to lab equipment via SMA connectors to monitor the RF FEM’s performance.

The nPM1100 Evaluation Kit (EK) is a tool for evaluating the nPM1100 and its features in your application. The kit features switches for all selectable settings, buttons to enter and exit ship mode and connectors for batteries, USB and headers for all pins on the PMIC.